HOW TO USE

Step 1: Preparing the Serum VialOur serums are sealed with aluminum to ensure they stay sterile until you’re ready to use them. Follow these steps to open the vial:

1. Hold the vial firmly: Keep a steady grip on the body of the vial with one hand. Look for the arrow on the cap and flip it open from where the arrow points.

2. Break the seal: Once the seal is broken, carefully bend the silver part back until it almost snaps off.

3. Peel off the rest: Remove the remaining silver seal from the top of the vial and dispose of it.

4. Remove the rubber stopper: Take off the rubber stopper to access the serum.

If the cap came off without the metal you can use scissors to cut the sides and pull it off (watch your hands!)

Now you’re ready to fill your Micro-Infusion device!

Step 2: Loading the Serum into the Micro-Infusion Device1. Fill the Device: Pour the serum from the vial into the Micro-Infusion chamber. Screw on the needle head.Don't screw on the head too tightly! You want to keep the needle head slightly loose where there is some airflow (but not enough for serum to leak), this will ensure that the serum flows properly.2. Flip It Upside Down: Turn the device upside down and let it sit for 2 minutes. This allows the serum to flow into the needle chamber for smooth application.

Step 3: Priming the Needles1. Gently press to prime: Keep the device upside down and lightly press the center pin of the needle head onto a clean, hard surface (like the side of the cap). This is like ‘pumping’ the device.

2. Look for bubbles: You should see tiny bubbles forming in the vial, which shows that the serum is beginning to flow. Keep pressing until the serum reaches the needle tips.

Step 4: Applying the Serum to Your Skin1. Tap, don’t press: Gently tap the device onto your skin. Don’t press too hard—light taps are all you need for the serum to be infused properly.

2. Cover your face evenly: Use a 50% overlap technique to ensure every area of your face gets treated twice for best results. 50% overlap means you tap one spot on your face/neck, then on the next tap you will tap 50% of the previous spot and 50% of the new spot.

Step 5: What to Do With Leftover SerumIf you have any serum left in the vial after your microneedling treatment:

• Use it up: Unscrew the top and apply any remaining serum to your face and neck with clean hands. This way, none of your precious serum goes to waste!